SHORE Subprograms
Contents
- 1 shore correct4pe
- 2 shore merge
- 3 shore mapdisp
- 4 shore consensus
- 5 shore qVar
- 6 shore structure
- 7 shore methyl
- 8 shore peak
- 9 shore srna
- 10 shore coverage
- 11 shore mg
- 12 shore count
- 13 shore tagstats
- 14 shore binom_test
- 15 shore mtc
- 16 shore annotate_region
- 17 shore convert
- 18 shore sort
- 19 shore compress
- 20 shore 2dex
- 21 shore idtrans
shore correct4pe
shore correct4pe finds the most likely mapping of repetitive reads by utilizing paired-end information. While in paired read mapping each read is aligned separately, read pair information can be used to increase the likelihood of an alignment by selecting the paired alignment based on the most likely distance between the pairs.
shore correct4pe starts by estimating the insert size distribution. The upper bound of this distribution is usually very sharp (clones longer than expected seem to be very rare), whereas the lower boundary is more blurred and very small clones can be observed as well. The insert size distribution is then translated into a probability distribution for the observation of a given distance of a pairing (where pairing is defined as the combination of one of the mappings of read 1 with one of the mappings of read 2). All possible combinations of the mappings of both reads of a pair are compared and all pairings with a probability equal to zero are dismissed. Mappings which are not in a pairing with a probability above zero are deleted. This removes all repetitive mappings, which resulted from repeats. If there is a mapping of one read pair with two different mappings of the other read the more likely pairing is kept. If all pairings have zero probability all mappings of both reads are kept. These are the discordant (unhappy) read pairs which typically are used to predict structural variants.
shore correct4pe will plot the insert size distribution using the R if -p is specified. In this case R has to be installed and included in the PATH environment variable.
Usage: shore correct4pe [OPTIONS]
| Mandatory | ||
| -l STRING[,...] | Lane or sample directories (comma separated) | |
| -x INT | Expected insert size, has to be larger than 0 | |
| -e INT | Library identifier, defines name space of the read identifiers (>=1) | |
| Optional | ||
| -r INT | (Default: 10000) | Maximum number of hits per read-pair |
| -s INT | SOLiD reads | |
| -m INT | Mate pair library instead of Paired-end library | |
| -i STRING | Insert distribution file (e.g. when re-running correct4pe) | |
| -d INT | Delete uncorrected map.list files | |
| -p INT | Plot insert dist | |
shore merge
Merges and filters alignment files
Usage: shore merge [OPTIONS] [ALIGNMENT_PATHS]
| Input | ||
| -m, --infiles=<arg[,...]> | Alignment files or shore directories (run, lane, read or sample; comma-separated; defaults to <outdir>) | |
| -I, --idordered | Input alignments are sorted by read ID and not by coordinate | |
| Main output options | ||
| -o, --outdir=<arg> | (Default: AlignmentFolder) | Set output directory (will be created if necessary) |
| -A, --no-alignments | Deactivate processing of alignment files (only merge insert size distributions or left over files) | |
| -l, --leftovers | Activate merging of leftover reads | |
| -p, --rplot | Graphical output of statistics using R | |
| Ancillary output options | ||
| -s, --subsamples=<arg[,...]> | Generate random subsamples of <arg> reads | |
| --diff | Write all reads that only occur in a single alignment file | |
| --phasesplit=<arg> | Split reads by <arg>-mer phasing | |
| --combine | Combine alignments (discard duplicate entries and alignments that are not the best hit) | |
| -q, --stats-only | Statistics only, do no write the merged data | |
| -t, --no-stats | Disable alignment statistic | |
| -Z, --nocompress | Do no compress output files | |
| -S, --stdout | Don't create an output directory, write alignments to standard output (implies -t, -Z) | |
| Alignment filter | ||
| -H, --hits-range=<arg,arg> | Set the allowed range of repetitiveness ('1,1' = nonrep reads) | |
| -M, --mm-range=<arg,arg> | Set the allowed range of mismatches | |
| -R, --region=<arg> | Only use reads that overlap with the range [chr1:pos1..[chr2:]pos2] | |
| --assume-length=<arg> | (Default: 400) | Assume maximal alignment length <arg>, enables fast range queries |
| -X, --p3fix=<arg> | Set the 3' end to a fixed distance from the 5' end | |
| -N, --read-lengths=<arg[,...]> | Use only reads of the given length(s) | |
| -T, --strand=<arg> | Use only reads from the given strand | |
| -B, --duplicates=<arg> | Report at maximum <arg> reads with the 5' end at the same position on the same strand | |
| --wpoiss=<arg> | Window size for adaptive duplicate read filtering | |
| --sam-ref=<arg> | Reference sequence for SAM file parsing | |
| --peflags=<arg[,...]> | Use only reads with the given PE flag(s) | |
| Leftover filter | ||
| --badqual=<arg> | (Default: 10) | Quality threshold |
| --maxbadbases=<arg> | (Default: 8) | Max. number low quality bases |
shore mapdisp
shore mapdisp provides text-based alignment visualization in the terminal. There are lots of much more sophisticated programs for viewing short read alignments. This tool is rather designed for extremely rapid inspection of the alignments in a specific region of the genome.
Usage: shore mapdisp [OPTIONS] SHORE_PATHS
| Output | ||
| --outfile=<arg> | Write to output file instead of using less | |
| Display | ||
| -d, --no-color | Do not use color terminal | |
| Read filtering | ||
| -H, --hits-range=<arg,arg> | Set the allowed range of repetitiveness ('1,1' = nonrep reads) | |
| -M, --mm-range=<arg,arg> | Set the allowed range of mismatches | |
| -R, --region=<arg> | Only use reads that overlap with the range [chr1:pos1..[chr2:]pos2] | |
| --assume-length=<arg> | (Default: 400) | Assume maximal alignment length <arg>, enables fast range queries |
| -X, --p3fix=<arg> | Set the 3' end to a fixed distance from the 5' end | |
| -N, --read-lengths=<arg[,...]> | Use only reads of the given length(s) | |
| -T, --strand=<arg> | Use only reads from the given strand | |
| -B, --duplicates=<arg> | Report at maximum <arg> reads with the 5' end at the same position on the same strand | |
| --wpoiss=<arg> | Window size for adaptive duplicate read filtering | |
| --sam-ref=<arg> | Reference sequence for SAM file parsing | |
| --peflags=<arg[,...]> | Use only reads with the given PE flag(s) | |
shore consensus
shore consensus is being replaced by shore qvar (but still a requirement for SHOREmap analysis).
The common output from whole genome re-sequencing projects are lists of all identified polymorphisms (e.g. SNPs, indels, CNVs) as well as reference-like positions. In addition a consensus sequence or contigs can be generated by combining all high quality predictions. shore consensus provides this functionality by sequentially scanning an alignment to gather all read information available at a specific locus (i.e. called bases, base qualities, coverage, repetitiveness, alignment quality). This information is subsequently used to predict differences to the reference sequence.
shore consensus can also be used to identify minor alleles (SNPs or short indels) in pooled samples. In addition shore consensus estimates several characteristics of a run ahead of the actual consensus calling. This includes min and max read length, min and max mismatches, sequencing depth, observed local repetitiveness and GC content bias. Consensus also provides multiple project statistics regarding sequencing error rate, correlation of quality values to observed errors and coverage biases due to local GC content, which can be used to optimize further analysis (e.g. deletions should not be called in low GC content regions if a strong GC bias is observed).
Note: shore consensus can also be applied to sRNA-seq, mRNA-seq and ChIP-seq data. However, SHORE provides more appropriate tools for those purposes (coverage and peak).
The output generated by shore consensus is described in SHORE consensus result files.
Usage: shore consensus [OPTIONS]
| Mandatory | ||
| -n STRING | Name (any of species, strain, accession, project or any other ID) | |
| -f STRING | Reference genome sequence from the IndexFolder, *.shore file | |
| -o STRING | AnalysisFolder, will be created | |
| -i STRING[,...] | Shore directories or map.list file(s) | |
| -g INT | Core offset - do not trust the first and last -g positions of the alignment. default: max MM's | |
| Quality threshold | ||
| -q INT | (Default: 5) | Cutoff for base masking using Sanger calibrated qualities |
| -c INT | Cutoff for base masking using chastity values | |
| Basecalling (scoring matrix approach) | ||
| -a STRING | Scoring matrix file (recommended, activates new basecalling approach) | |
| -b FLOAT | (Default: 0.2) | Minimum allele frequency of alternative base call |
| Basecalling (decision tree approach) | ||
| -x INT | (Default: 3) | Minimum coverage threshold |
| -m INT | (Default: 3) | Maximum observed to expected coverage |
| -e FLOAT | (Default: 0.1) | Minimum observed to expected coverage |
| -y FLOAT | (Default: 0.8) | Minimum concordance of homozygous SNPs (0 to 1) |
| -d FLOAT | (Default: 0.67) | Minimum concordance of homozygous Indels |
| -t FLOAT | (Default: 0.25) | Minimum frequency for heterozygous pos (0 to 1) |
| -u FLOAT | (Default: 0.02) | Minimum frequency for minor allele pos (0 to 1) |
| -z INT | (Default: 10) | Quality threshold, max base quality |
| Optional | ||
| -R INT | Allow base calling in highly repetitive regions | |
| -s INT | Consensus analysis using transcriptome (mRNA-seq) reads. Turns off CNV analysis | |
| -S INT | (Default: 0) | Ignore position with transcriptome coverage not above threshold |
| -w INT | Use graph based map.list format (only genomemapper) | |
| -v INT | Create additional output files containing all intermediate data (required for subsequent SHOREmap analysis) | |
| -r INT | Graphical output of statistics using R | |
| -N INT | Turn off calculation of long deletions, duplications and any other CNVs | |
shore qVar
Computes consensus sequence, SNPs, indels and CNVs from alignments
shore structure
shore structure enables the detection of diverged regions through clustering of mate pairs alignments with an unexpected distance and/or orientation to each other. Typically the recall is very good for deletions, but insertions longer than the insert size are cannot be revealed. In addition shore structure calls inversions. Currently only works for homozygous changes.
shore methyl
Quantify methylated and unmethylated cytosines from BS-seq alignments (only genomemapper)
shore peak
shore peak provides enriched region prediction for ChIP-Seq experiments. Significance of the predicted regions is assessed by comparison to the specified control samples.
Replicate experiments may be processed simultaneously by specifying multiple experiment and control paths. While the significance of each peak region is then tested for independently for each replicate, the region prediction itself is performed jointly for all experiments to obtain results that are immediately comparable.
The output generated by shore peak is described in SHORE peak result files.
Usage: shore peak [OPTIONS]
| Mandatory | ||
| -o, --outfolder=<arg> | (Default: PeakAnalysis) | Output directory (will be created) |
| -i, --chip-paths=<arg[:...][,...]> | ChIP experiment alignment files or shore directories (replicates) | |
| -c, --ctrl-paths=<arg[:...][,...]> | Control experiment alignment files or shore directories | |
| Segmentation | ||
| -S, --window-size=<arg> | (Default: 2000) | Sliding window size for dynamic segmentation. Note that this value presents an upper bound for the size of the peaks that can be detected. |
| -P, --poisson-threshold=<arg> | (Default: 0.05) | Poisson probability threshold [<=] for dynamic segmentation |
| -V, --probation=<arg> | (Default: 0) | Allow a mitigated threshold for at most <arg> base pairs inside a segment |
| -Q, --mitigator=<arg> | (Default: 1) | Modifier for calculation of the mitigated threshold, value in [0,1] |
| -J, --minsize=<arg> | (Default: 131) | Segment size threshold [>=] |
| Normalization | ||
| -b, --binsize=<arg> | (Default: 4000) | Size of read bins for normalization |
| -q, --rankmaxquant-ubound=<arg> | (Default: 1) | Quantile upper bound for the rank maxima of the bins used |
| Read filter | ||
| -H, --hits-range=<arg,arg> | Set the allowed range of repetitiveness ('1,1' = nonrep reads) | |
| -M, --mm-range=<arg,arg> | Set the allowed range of mismatches | |
| -R, --region=<arg> | Only use reads that overlap with the range [chr1:pos1..[chr2:]pos2] | |
| --assume-length=<arg> | (Default: 400) | Assume maximal alignment length <arg>, enables fast range queries |
| -X, --p3fix=<arg> | (Default: 130) | Set the 3' end to a fixed distance from the 5' end (set to 0 to disable) |
| -N, --read-lengths=<arg[,...]> | Use only reads of the given length(s) | |
| -B, --duplicates=<arg> | Report at maximum <arg> reads with the 5' end at the same position on the same strand | |
| --sam-ref=<arg> | Reference sequence for SAM file parsing | |
| --peflags=<arg[,...]> | Use only reads with the given PE flag(s) | |
| -F, --poissonifier-width=<arg> | (Default: 13) | Set the window size for the adaptive duplicate read filter (set to zero to disable) |
| Peak filtering | ||
| -n, --nsigma=<arg> | (Default: 6) | Allow the mean segment coverage any control sample to be at most <arg> std. deviations higher than the median before discarding the segment |
| --min-xshift=<arg> | (Default: 10) | Require a certain shift for the reverse strand peak in at least one experiment |
| --min-foldchange=<arg> | (Default: 2) | Require a minimum normalized fold change of <arg> for experiment vs. control for at least one experiment |
| Other | ||
| --non-directional | Assume that any clone may be sequenced from both ends (calculates a more conservative FDR) | |
| -d, --rankproduct=<arg> | (Default: 10000) | Number of simulations for rankproduct PFP estimation (set to zero to disable PFP estimation) |
| --rplot=<arg> | (Default: 100) | Plot the first <arg> peaks using R |
| -r, --index-file=<arg> | Extract sequence information for each segment from *.shore index file | |
| -a, --annotation-file=<arg> | Annotation file, GFF3 file in sequence ontology compliant format | |
| -O, --chr-ordering=<arg[,...]> | Allows to specify the order of chromosome entries in the annotation file | |
| --so-filter=<arg[,...]> | (Default: gene,transposable_element_gene) | Only parse toplevel annotation features of the given SO types |
shore srna
The purpose of shore srna is facilitating the analysis of small RNA sequencing data. The genome is scanned for regions where significant amounts of small RNAs are expressed and annotates these loci by read counts as well as the sRNA size that predominates.
Usage: shore srna [OPTIONS] [SAMPLE_PATHS]
| Mandatory | ||
| -s, --samples=<arg[:...][,...]> | Shore directories (comma-separated; colon-separated items will be treated as a single assay) | |
| -o, --outfolder=<arg> | (Default: SrnaAnalysis) | Output directory |
| Segmentation | ||
| -j, --joint-seg | Apply segmentation threshold to the joint coverage instead of per-sample coverage | |
| -C, --static-threshold=<arg> | (Default: 10) | Coverage threshold [>] |
| -J, --minsize=<arg> | (Default: 15) | Segment size threshold [>=] |
| -V, --probation=<arg> | (Default: 0) | Allow a mitigated threshold for at most <arg> base pairs inside a segment |
| -Q, --mitigator=<arg> | (Default: 1) | Modifier for calculation of the mitigated threshold, value in [0,1] |
| -v, --overlap=<arg> | (Default: 1) | Required overlap for merging segments (may be negative to allow gaps) |
| Alignment filter | ||
| -H, --hits-range=<arg,arg> | Set the allowed range of repetitiveness ('1,1' = nonrep reads) | |
| -M, --mm-range=<arg,arg> | Set the allowed range of mismatches | |
| -R, --region=<arg> | Only use reads that overlap with the range [chr1:pos1..[chr2:]pos2] | |
| --assume-length=<arg> | (Default: 400) | Assume maximal alignment length <arg>, enables fast range queries |
| -B, --duplicates=<arg> | Report at maximum <arg> reads with the 5' end at the same position on the same strand | |
| --sam-ref=<arg> | Reference sequence for SAM file parsing | |
| --peflags=<arg[,...]> | Use only reads with the given PE flag(s) | |
shore coverage
For analysis of expression levels of mRNAs and small RNAs or for detection of unknown transcripts it is typically required to generate a coverage graph and to define expressed segments based on consecutive coverage.
shore coverage generates a coverage graph by sequentially scanning the alignment and basically counting reads.
Usage: shore coverage [OPTIONS] [MAPFILES]
| Input | ||
| -m, --mapfiles=<arg[:...][,...]> | Alignment files or shore directories (flowcell, lane, pe or barcode; comma-separated; colon-separated items will be treated as single assay) | |
| -n, --merge-input | Merge all input files | |
| Output | ||
| -o, --output-directory=<arg> | (Default: CoverageAnalysis) | Output directory (will be created) |
| -s, --segmentation | Write segmentation files | |
| -t, --merge-segments=<arg> | Overlap in base pairs for merging segment files (may be negative to allow gaps); if unspecified, segments will not be merged | |
| -q, --no-coverage | Do not write coverage files | |
| -z, --compress | Compress output files | |
| --rplot | Plot the specified range using R | |
| --ylim=<arg> | Set y axis limit for plots (default: auto) | |
| --phasing=<arg> | Visualize <arg>-mer phasing | |
| Alignment filter | ||
| -H, --hits-range=<arg,arg> | Set the allowed range of repetitiveness ('1,1' = nonrep reads) | |
| -M, --mm-range=<arg,arg> | Set the allowed range of mismatches | |
| -R, --region=<arg> | Only use reads that overlap with the range [chr1:pos1..[chr2:]pos2] | |
| --assume-length=<arg> | (Default: 400) | Assume maximal alignment length <arg>, enables fast range queries |
| -X, --p3fix=<arg> | Set the 3' end to a fixed distance from the 5' end | |
| -N, --read-lengths=<arg[,...]> | Use only reads of the given length(s) | |
| -T, --strand=<arg> | Use only reads from the given strand | |
| -B, --duplicates=<arg> | Report at maximum <arg> reads with the 5' end at the same position on the same strand | |
| --wpoiss=<arg> | Window size for adaptive duplicate read filtering | |
| --sam-ref=<arg> | Reference sequence for SAM file parsing | |
| --peflags=<arg[,...]> | Use only reads with the given PE flag(s) | |
| Coverage | ||
| -W, --weight-repetitive=<arg> | (Default: divide) | How to weight repetitive hits (divide or multiply or const) |
| Segmentation | ||
| -C, --static-threshold=<arg> | (Default: 10) | Coverage threshold [>] for static segmentation |
| -J, --minsize=<arg> | (Default: 20) | Segment size threshold [>=] for static or dynamic segmentation |
| -V, --probation=<arg> | (Default: 0) | Allow a mitigated threshold for at most <arg> base pairs inside a segment |
| -Q, --mitigator=<arg> | (Default: 1) | Modifier for calculation of the mitigated threshold, value in [0,1] |
| -D, --dynamic | Switches to dynamic segmentation | |
| -S, --window-size=<arg> | (Default: 2000) | Sliding window size for dynamic segmentation |
| -P, --poisson-threshold=<arg> | (Default: 0.05) | Poisson probability threshold [<=] for dynamic segmentation |
shore mg
Primitive metagenomic analysis
Usage: shore mg [OPTIONS] [MAP_PATHS]
| Allowed options | ||
| -f, --mappaths=<arg[,...]> | Input directories or files | |
| -o, --outfolder=<arg> | (Default: Mg) | Output directory, will be created |
| --collapse=<arg[:...][,...]> | Collapse any sequence ID not listed here to the next smaller one in the list | |
| --power | Initialize the ID combinations for collapse with the power set of all IDs | |
| --autocollapse=<arg> | Specify *.trans or ref.txt file to automatically collapse to the species level; preprocess must have been run with the --fullheader option; 2nd & 3rd word of fasta headers are taken to be the species name | |
| --make-unique | Make alignments unique before processing | |
| Read filter | ||
| -H, --hits-range=<arg,arg> | Set the allowed range of repetitiveness ('1,1' = nonrep reads) | |
| -M, --mm-range=<arg,arg> | Set the allowed range of mismatches | |
| -N, --read-lengths=<arg[,...]> | Use only reads of the given length(s) | |
| -T, --strand=<arg> | Use only reads from the given strand | |
| --sam-ref=<arg> | Reference sequence for SAM file parsing | |
| --peflags=<arg[,...]> | Use only reads with the given PE flag(s) | |
shore count
shore count calculates the read count as well as other properties for regions in the genome that have already been defined by some other means. It may be used to analyze either fixed-size jumping windows over the genome or regions defined in an input file, e.g. to analyze annotated coding regions or to manually re-analyze regions defined by the segmentation algorithms of shore coverage, shore peak or shore srna.
Accepted input files are tab-delimited plain text files with a header specifying the columns chr, pos, size and optionally strand.
Usage: shore count [OPTIONS] [MAPFILES]
| Mandatory | ||
| -m, --mapfiles=<arg[:...][,...]> | Alignment files or shore directories (flowcell, lane, pe or barcode; comma-separated; colon-separated items will be treated as single assay) | |
| -o, --output-folder=<arg> | (Default: SegmentAnalysis) | Output directory, will be created |
| Variable size | ||
| -f, --segment-file=<arg> | Set file with segment information (expects a sorted file with columns chr, pos, size, strand) | |
| Fixed size | ||
| -s, --segment-size=<arg> | Use segments of fixed size <arg> instead of a file | |
| -j, --segment-distance=<arg> | Distance of fixed size segments (defaults to segment size) | |
| -t, --strand-specific | Count both strands separately | |
| Output | ||
| -k, --rpkm | Also calculate reads per kilobase & million (RPKM) values (totals calculated without applying the alignment filter) | |
| --totals-file=<arg> | Read totals for RPKM calculation from a file | |
| -a, --fasta-file=<arg> | If a fasta file is provided, the sequence will be reported for each segment | |
| Counting | ||
| -O, --overlap=<arg> | (Default: 50%) | Required amount of overlap between read and feature (percentage or absolute) |
| -W, --weight-repetitive=<arg> | (Default: divide) | How to weight repetitive hits (divide or multiply or const) |
| Alignment filter | ||
| -H, --hits-range=<arg,arg> | Set the allowed range of repetitiveness ('1,1' = nonrep reads) | |
| -M, --mm-range=<arg,arg> | Set the allowed range of mismatches | |
| -R, --region=<arg> | Only use reads that overlap with the range [chr1:pos1..[chr2:]pos2] | |
| --assume-length=<arg> | (Default: 400) | Assume maximal alignment length <arg>, enables fast range queries |
| -X, --p3fix=<arg> | Set the 3' end to a fixed distance from the 5' end | |
| -N, --read-lengths=<arg[,...]> | Use only reads of the given length(s) | |
| -T, --strand=<arg> | Use only reads from the given strand | |
| -B, --duplicates=<arg> | Report at maximum <arg> reads with the 5' end at the same position on the same strand | |
| --wpoiss=<arg> | Window size for adaptive duplicate read filtering | |
| --sam-ref=<arg> | Reference sequence for SAM file parsing | |
| --peflags=<arg[,...]> | Use only reads with the given PE flag(s) | |
shore tagstats
Gather read statistics for multiple samples. This is mainly intended for small RNA sequencing when no reference is available.
Usage: shore tagstats [OPTIONS] [PATHS]
| Allowed options | ||
| -i, --readpaths=<arg[:...][,...]> | SHORE directories or read file paths | |
| -o, --outdir=<arg> | (Default: ReadAnalysis) | Output directory |
| -r, --report=<arg> | (Default: 1) | Only report a sequence if it's represented at least <arg> times |
| -p, --pseudo=<arg> | (Default: 0) | Add a pseudocount of <arg> to each read count |
shore binom_test
shore binom_test can be used to evaluate two sets of count data agaist each other using a binomial test.
Usage: shore binom_test [OPTIONS]
| Allowed options | ||
| -i, --input-file=<arg> | (Default: stdin) | Read count input file |
| -o, --output-file=<arg> | (Default: stdout) | Output file |
| -p, --distribution-p=<arg> | (Default: 0.5) | Parameter p of the binomial distribution |
| -n, --normalization-file=<arg> | File with scaling factors for each column (overrides '-p') | |
| -a, --alternative=<arg> | (Default: less) | Specifies the alternative hypothesis for the test (less or greater or twosided) |
| -1, --first-column=<arg> | Name of the first read count column | |
| -2, --2nd-column=<arg> | Name of the second read count column (tested vs. column 1) | |
| --global-scaling=<arg> | (Default: 1) | Scaling constant with wich all read counts are multiplied |
| -j, --input-header=<arg[,...]> | Specify header for input file, if not available | |
| -f, --fold-change | Report fold enrichment values | |
| --fdr-bh | Calculate Benjamini-Hochberg FDR | |
| --sort | Sort output | |
shore mtc
The subprogram shore mtc implements various multiple testing correction methods. The expected input is a tab-delimited text file with a header, and the column containing the p-values to be adjusted must be named raw_p.
Implemented methods include
- Benjamini-Hochberg false discovery rate control (fdr_bh)
- Bonferroni familywise error rate control (fwer_bonferroni)
- Holm familywise error rate control (fwer_holm)
- Hochberg familywise error rate control (fwer_hochberg)
- Sidak singlestep familywise error rate control (fwer_sidak_ss)
- Sidak stepdown familywise error rate control (fwer_sidak_sd)
- Benjamini-Yekutieli false discovery rate control (fdr_by).
Usage: shore mtc [OPTIONS]
| Mandatory | ||
| -m, --method=<arg[,...]> | Select correction method(s), out of: fdr_bh, fwer_bonferroni, fwer_holm, fwer_hochberg, fwer_sidak_ss, fwer_sidak_sd, fdr_by | |
| -i, --input-file=<arg> | (Default: stdin) | The file the raw p-values are read from (expects a column 'raw_p') |
| -o, --output-file=<arg> | (Default: stdout) | Output file |
| Output | ||
| -u, --fdr-max=<arg> | (Default: 1) | Maximum q-value to report |
| -e, --echo-comments | Echo all comments read from input files to stdout | |
| -q, --quiet | Do not print input, only report the q-values | |
| Other | ||
| -j, --input-header=<arg[,...]> | Use arg as input file header | |
shore annotate_region
shore annotate_region can be used to annotate previously defined genomic regions with the overlapping or nearest genes present in an annotation file. Only the central base of each region will be annotated. The annotation file must be in standard GFF format.
Usage: shore annotate_region [OPTIONS]
| Mandatory | ||
| -a, --annotation-file=<arg> | Annotation file | |
| -f, --feature-file=<arg> | File with the features to be annotated. This file must contain a header specifying the columns 'chr', 'pos' and optionally 'size' or 'end' | |
| -o, --outfile=<arg> | (Default: stdout) | Output file |
| Optional | ||
| --header=<arg[,...]> | Header for the feature file | |
| --range | Use the real regions and not just the central base | |
| --gff | Write output in GFF format | |
| --so-filter=<arg[,...]> | (Default: gene,transposable_element_gene) | Only parse toplevel features of the given Sequence Ontology (SO) types |
| Just print the annotation tree | ||
| --query-pos=<arg> | Query annotation for the given position | |
shore convert
Convert SHORE files into common file formats, and vice versa.
Available converters:
- Alignment2ALN
- Alignment2BED
- Alignment2GFF
- Alignment2Maplist
- Alignment2SAM
- ColorFlat2Fastq
- Contig2AFG
- Eland2Maplist
- ExpandTabs
- FlatPair2Fastq
- Maplist2Eland
- Reads2Fasta
- Reads2Fastq
- Reads2Flat
- Reads2Qual
- Solid2Fastq
- Solid2Flat
- Variant2GFF
- Variant2VCF
Alignment2... converters can convert
- SHORE map.list files (default)
- SAM files (*.sam)
- BAM files (*.bam)
Reads2... converters can convert
- SHORE reads_0.fl files (default)
- FastQ files (*.fq, *.fastq)
- 454 Standard Flowgram Format SFF (*.sff)
- Illumina QSEQ files (*.qseq, *_qseq.txt)
- SHORE map.list files (*.list) (discards alignment information and only keeps the read information; input files must be sorted by read ID)
By default, the SHORE file formats (map.list and reads_0.fl, respectively) are expected as input. All other file types must have the correct file extensions to be recognized (an additional .gz is allowed for compressed files).
Additionally, the special file names stdin and stdout may be used for reading from standard input and for writing to standard output, respectively.
For stdin, map.list format is expected for Alignment2... conversions and reads_0.fl format for Reads2... conversions. To convert different formats from standard input, use e.g. stdin.sam, stdin.fastq.gz, etc.
shore sort
Sort / merge tab-delimited text files
Usage: shore sort [OPTIONS] [TEXT_FILES]
| Allowed options | ||
| -i, --infiles=<arg[,...]> | A comma-separated list of plain-text input files | |
| -o, --outfile=<arg> | (Default: stdout) | Output file |
| -p, --preset=<arg> | Automatically select sort keys for the file type specified. Supported values: * maplist: map.list format sorted by genomic coordinate * maplist_id: map.list format sorted by read ID * reads0: reads flat file format sorted by read ID * gff: GFF format sorted by position | |
| -k, --keystring=<arg> | Concatenation of column ids (counted from 1) and key types. Valid key types: t (text), i (integer) and f (float); capital letters reverse the sort order - e.g. '-k 1i5t3i7I'. | |
| -I, --inplace | Output file is the same as the input file | |
| -t, --tmpdir=<arg> | Temporary file directory (defaults to $TMPDIR or /tmp) | |
| -B, --blocksize=<arg> | (Default: 2048) | Block size in megabytes |
| -m, --nur-merge | Merge already sorted files | |
| -u, --unique | Output only the first of an equal run | |
| -c, --check | Only test if the files are sorted | |
| -b, --upper-bound=<arg[,...]> | Returns byte offset (counted from 0) and text of the first line in a sorted file that compares greater than the keys given in <arg> (provide comma-separated values in order of key priority) | |
| -T, --tail=<arg[,...]> | Print all lines in a sorted file that compare greater than the keys given in <arg> (provide comma-separated values in order of key priority) | |
| -C, --no-comments | Do not treat line comments and empty lines specially | |
| -v, --verbose | Be more verbose | |
shore compress
Compress files to indexed gzip format
Usage: shore compress [OPTIONS] FILES
| Allowed options | ||
| --outfile=<arg> | Write to the file <arg> instead of <infile>.gz | |
| --replace | Remove original files after compression. If the input file is already compressed it will be recompressed and replaced | |
| --tail=<arg> | Instead of compressing files, dump the last <arg> bytes of a seekable file | |
| --dumpgzx | Print out the index for each file | |
shore 2dex
Range-indexing and query for tab-delimited text files
Usage: shore 2dex [OPTIONS] [TEXT_FILES]
| Mandatory | ||
| -i, --infiles=<arg[,...]> | A comma-separated list of tab-delimited plain-text input files (can also be any SHORE directory when -f MAPLIST is set) | |
| Format Options | ||
| -f, --format=<arg> | Provide file type for automatic settings, valid file types: MAPLIST, GFF, SAM | |
| -c, --chr-column=<arg> | Column w. chromosome or sequence name, provide the column name or @<column_number> | |
| -p, --pos-column=<arg> | Column w. start position, provide the column name or @<column_number> | |
| -s, --size-column=<arg> | Column w. feature size, provide the column name or @<column_number> | |
| -e, --end-column=<arg> | Column w. end position (inclusive), provide the column name or @<column_number> | |
| -x, --xend-column=<arg> | Column w. end position (exclusive), provide the column name or @<column_number> | |
| -C, --commentchar=<arg> | Comment line symbol | |
| Index Options | ||
| -B, --blocksize=<arg> | (Default: 131072) | Block size determining the index resolution in bytes |
| -G, --maxgap=<arg> | (Default: 131072) | Maximum sequence gap in a block |
| Query Options | ||
| -q, --query=<arg> | A range to query; prints all overlapping records. Valid ranges: 'SEQ:POS~SIZE', 'SEQ:POS..END', 'SEQ1:POS..SEQ2:END', 'SEQ:POS...XEND', 'SEQ1:POS...SEQ2:XEND' (END: inclusive, XEND: exclusive) | |
| Other | ||
| -v, --verbose | Be more verbose | |
| -Q, --quiet | Be less verbose | |
shore idtrans
SHORE uses numerical identifiers for all sequences of the reference. shore idtrans simplifies translating these numbers in some of the result files back into chromosome names as specified in the reference fasta file (and vice versa).
Required is either a *.trans file which is stored in the IndexFolder by shore preprocess, or a ref.txt file generated by shore mapflowcell.
Usage: shore idtrans [OPTIONS] FILES
| Allowed options | ||
| -t, --transfile=<arg> | *.trans file from IndexFolder | |
| -r, --reffile=<arg> | ref.txt file generated by mapflowcell | |
| -o, --outfile=<arg> | Output file (default: <infile>.idtrans) | |
| -c, --columns=<arg[,...]> | (Default: chr) | Columns to be translated (column names or @<column_number>) |
| --name2id | Translate names to IDs (default: translate IDs to names) | |
| --nocompress | Do not compress output files | |
