SHORE Subprograms
Contents
shore annotate_region
shore annotate_region can be used to annotate previously defined genomic regions with the overlapping or nearest genes present in an annotation file. Only the central base of each region will be annotated. The annotation file must be in standard GFF format.
Usage: shore annotate_region [OPTIONS]
| Mandatory | ||
| -a, --annotation-file=<arg> | Annotation file | |
| -f, --feature-file=<arg> | File with the features to be annotated. This file must contain a header specifying the columns 'chr', 'pos' and optionally 'size' or 'end' | |
| -o, --outfile=<arg> | (Default: stdout) | Output file |
| Optional | ||
| --header=<arg[,...]> | Header for the feature file | |
| --range | Use the real regions and not just the central base | |
| --gff | Write output in GFF format | |
| --so-filter=<arg[,...]> | (Default: gene,transposable_element_gene) | Only parse toplevel features of the given Sequence Ontology (SO) types |
| Just print the annotation tree | ||
| --query-pos=<arg> | Query annotation for the given position | |
shore convert
Convert SHORE files into common file formats, and vice versa.
Available converters:
- Alignment2ALN
- Alignment2BED
- Alignment2GFF
- Alignment2Maplist
- Alignment2SAM
- ColorFlat2Fastq
- Contig2AFG
- Eland2Maplist
- ExpandTabs
- FlatPair2Fastq
- Maplist2Eland
- Reads2Fasta
- Reads2Fastq
- Reads2Flat
- Reads2Qual
- Solid2Fastq
- Solid2Flat
- Variant2GFF
- Variant2VCF
Alignment2... converters can convert
- SHORE map.list files (default)
- SAM files (*.sam)
- BAM files (*.bam)
Reads2... converters can convert
- SHORE reads_0.fl files (default)
- FastQ files (*.fq, *.fastq)
- 454 Standard Flowgram Format SFF (*.sff)
- Illumina QSEQ files (*.qseq, *_qseq.txt)
- SHORE map.list files (*.list) (discards alignment information and only keeps the read information; input files must be sorted by read ID)
By default, the SHORE file formats (map.list and reads_0.fl, respectively) are expected as input. All other file types must have the correct file extensions to be recognized (an additional .gz is allowed for compressed files).
Additionally, the special file names stdin and stdout may be used for reading from standard input and for writing to standard output, respectively.
For stdin, map.list format is expected for Alignment2... conversions and reads_0.fl format for Reads2... conversions. To convert different formats from standard input, use e.g. stdin.sam, stdin.fastq.gz, etc.
shore sort
Sort / merge tab-delimited text files
Usage: shore sort [OPTIONS] [TEXT_FILES]
| Allowed options | ||
| -i, --infiles=<arg[,...]> | A comma-separated list of plain-text input files | |
| -o, --outfile=<arg> | (Default: stdout) | Output file |
| -p, --preset=<arg> | Automatically select sort keys for the file type specified. Supported values: * maplist: map.list format sorted by genomic coordinate * maplist_id: map.list format sorted by read ID * reads0: reads flat file format sorted by read ID * gff: GFF format sorted by position | |
| -k, --keystring=<arg> | Concatenation of column ids (counted from 1) and key types. Valid key types: t (text), i (integer) and f (float); capital letters reverse the sort order - e.g. '-k 1i5t3i7I'. | |
| -I, --inplace | Output file is the same as the input file | |
| -t, --tmpdir=<arg> | Temporary file directory (defaults to $TMPDIR or /tmp) | |
| -B, --blocksize=<arg> | (Default: 2048) | Block size in megabytes |
| -m, --nur-merge | Merge already sorted files | |
| -u, --unique | Output only the first of an equal run | |
| -c, --check | Only test if the files are sorted | |
| -b, --upper-bound=<arg[,...]> | Returns byte offset (counted from 0) and text of the first line in a sorted file that compares greater than the keys given in <arg> (provide comma-separated values in order of key priority) | |
| -T, --tail=<arg[,...]> | Print all lines in a sorted file that compare greater than the keys given in <arg> (provide comma-separated values in order of key priority) | |
| -C, --no-comments | Do not treat line comments and empty lines specially | |
| -v, --verbose | Be more verbose | |
shore compress
Compress files to indexed gzip format
Usage: shore compress [OPTIONS] FILES
| Allowed options | ||
| --outfile=<arg> | Write to the file <arg> instead of <infile>.gz | |
| --replace | Remove original files after compression. If the input file is already compressed it will be recompressed and replaced | |
| --tail=<arg> | Instead of compressing files, dump the last <arg> bytes of a seekable file | |
| --dumpgzx | Print out the index for each file | |
shore 2dex
Range-indexing and query for tab-delimited text files
Usage: shore 2dex [OPTIONS] [TEXT_FILES]
| Mandatory | ||
| -i, --infiles=<arg[,...]> | A comma-separated list of tab-delimited plain-text input files (can also be any SHORE directory when -f MAPLIST is set) | |
| Format Options | ||
| -f, --format=<arg> | Provide file type for automatic settings, valid file types: MAPLIST, GFF, SAM | |
| -c, --chr-column=<arg> | Column w. chromosome or sequence name, provide the column name or @<column_number> | |
| -p, --pos-column=<arg> | Column w. start position, provide the column name or @<column_number> | |
| -s, --size-column=<arg> | Column w. feature size, provide the column name or @<column_number> | |
| -e, --end-column=<arg> | Column w. end position (inclusive), provide the column name or @<column_number> | |
| -x, --xend-column=<arg> | Column w. end position (exclusive), provide the column name or @<column_number> | |
| -C, --commentchar=<arg> | Comment line symbol | |
| Index Options | ||
| -B, --blocksize=<arg> | (Default: 131072) | Block size determining the index resolution in bytes |
| -G, --maxgap=<arg> | (Default: 131072) | Maximum sequence gap in a block |
| Query Options | ||
| -q, --query=<arg> | A range to query; prints all overlapping records. Valid ranges: 'SEQ:POS~SIZE', 'SEQ:POS..END', 'SEQ1:POS..SEQ2:END', 'SEQ:POS...XEND', 'SEQ1:POS...SEQ2:XEND' (END: inclusive, XEND: exclusive) | |
| Other | ||
| -v, --verbose | Be more verbose | |
| -Q, --quiet | Be less verbose | |
shore idtrans
SHORE uses numerical identifiers for all sequences of the reference. shore idtrans simplifies translating these numbers in some of the result files back into chromosome names as specified in the reference fasta file (and vice versa).
Required is either a *.trans file which is stored in the IndexFolder by shore preprocess, or a ref.txt file generated by shore mapflowcell.
Usage: shore idtrans [OPTIONS] FILES
| Allowed options | ||
| -t, --transfile=<arg> | *.trans file from IndexFolder | |
| -r, --reffile=<arg> | ref.txt file generated by mapflowcell | |
| -o, --outfile=<arg> | Output file (default: <infile>.idtrans) | |
| -c, --columns=<arg[,...]> | (Default: chr) | Columns to be translated (column names or @<column_number>) |
| --name2id | Translate names to IDs (default: translate IDs to names) | |
| --nocompress | Do not compress output files | |
